Powerfix PDM 250 A2 Manual do Utilizador Página 13
- Página / 90
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
POWERFIX PDM 250 A2
English - 11
First use
Never exceed the maximum permissible input values.
Before measuring, remove the cover of the test probes [7] and the test lead and switch on the
multimeter by pressing the on/off button [10]. The multimeter has an auto power OFF function
and switches itself off automatically after longer periods of non-use. However, you can also switch
off the multimeter directly with the on/off button [10].
You obtain a more accurate measurement result if you use the smallest possible measuring
range.
Overflow indicator
The multimeter has an overflow indicator. If a measured value exceeds the range limit of the
selected measuring range, "1" is indicated on the display [1]. In this case, switch to a higher
measuring range immediately if possible, or remove the test probes [7] from the test object.
DC voltage measurement
Connect the black test lead to the COM jack [5] and the red test lead to the V jack [6].
Set the range selector switch [4] to the desired range in the DC voltage measuring range
V
.
If you do not know the voltage, first set the highest possible measuring range and then
reduce it gradually to the lower ranges until you obtain a satisfactory measurement result.
Connect the test probes [7] to the test object.
The measurement result is then indicated on the display [1]. A negative sign is indicated in
front of the measured value for a negative measurement result.
AC voltage measurement
Connect the black test lead to the COM jack [5] and the red test lead to the V jack [6].
Set the range selector switch [4] to the desired range in the AC voltage measuring range V
~
.
If you do not know the voltage, first set the highest possible measuring range and then
reduce it gradually to the lower ranges until you obtain a satisfactory measurement result.
Connect the test probes [7] to the test object.
The measurement result is then indicated on the display [1].
- Content 4
- Introduction 5
- Intended use 5
- Supplied items 6
- Technical data 7
- Safety instructions 9
- Copyright 11
- Prior to use 11
- First use 13
- Overflow indicator 13
- DC voltage measurement 13
- AC voltage measurement 13
- AC current measurement 14
- DC current measurement 14
- Battery test 14
- Resistance measurement 15
- Continuity test 15
- Diode test 16
- HOLD function 16
- One-hand operation 17
- Cleaning / maintenance 17
- Maintenance 17
- Replacing the fuse 18
- Cleaning 19
- Conformity information 19
- Sisältö 21
- Johdanto 22
- Määräystenmukainen käyttö 22
- Toimituksen sisältö 23
- Tekniset tiedot 24
- Turvallisuusohjeet 26
- Tekijänoikeus 28
- Ennen käyttöönottoa 28
- Käyttöönotto 30
- Ylimenoilmaisin 30
- Tasajännitteen mittaus DC 30
- Vaihtojännitteen mittaus AC 30
- Vaihtovirran mittaus AC 31
- Tasavirran mittaus DC 31
- Paristotesti 31
- Resistanssin mittaus 32
- Johtavuustesti 32
- Dioditesti 33
- HOLD-toiminto 33
- Käyttö yhdellä kädellä 34
- Huolto/puhdistus 34
- Varokkeen vaihtaminen 35
- Puhdistus 36
- Vaatimustenmukaisuus 36
- Takuu ja huolto 37
- Innehåll 38
- Inledning 39
- Avsedd användning 39
- Leveransomfattning 40
- Tekniska data 41
- Säkerhetsanvisningar 43
- Upphovsrätt 45
- Före idrifttagningen 45
- Sätta i/byta batteri 46
- Idrifttagande 47
- Indikator för överskridning 47
- Likspänningsmätning DC 47
- Växelspänningsmätning AC 47
- Växelströmsmätning AC 48
- Likströmsmätning DC 48
- Batteritest 49
- Resistansmätning 49
- Kontinuitetsmätning 50
- Diodtest 50
- HOLD-funktion 50
- Användning med en hand 51
- Ställa/hänga upp multimetern 51
- Underhåll / rengöring 51
- Underhåll 51
- Byta säkring 52
- Rengöring 53
- Konformitetsinformation 53
- Indholdsfortegnelse 55
- Indledning 56
- Korrekt anvendelse 56
- Pakkens indhold 57
- Tekniske data 58
- Sikkerhedsanvisninger 60
- Ophavsrettighed 62
- Før ibrugtagning 62
- Ibrugtagning 64
- Overløbsdisplay 64
- Måling af jævnspænding DC 64
- Måling af vekselspænding AC 64
- Måling af vekselstrøm AC 65
- Måling af jævnstrøm DC 65
- Batterikontrol 66
- Modstandsmåling 66
- Kontinuitetsverifikation 67
- Diodekontrol 67
- Betjening med én hånd 68
- Vedligeholdelse/rengøring 68
- Vedligeholdelse 68
- Udskiftning af sikringen 69
- Miljø og bortskaffelse 70
- Overensstemmelse 70
- Rengøring 70
- Einleitung 73
- Bestimmungsgemäße Verwendung 73
- Lieferumfang 74
- Technische Daten 75
- Sicherheitshinweise 77
- Urheberrecht 79
- Vor der Inbetriebnahme 79
- Batterie einlegen/wechseln 80
- Inbetriebnahme 81
- Überlaufanzeige 81
- Gleichspannungsmessung DC 81
- Wechselspannungsmessung AC 81
- Wechselstrommessung AC 82
- Gleichstrommessung DC 82
- Batterietest 83
- Widerstandsmessung 83
- Durchgangsprüfung 84
- Diodentest 84
- HOLD-Funktion 84
- Einhandbetrieb 85
- Wartung / Reinigung 85
- Wartung 85
- Sicherung austauschen 86
- Reinigung 87
- Konformitätsvermerke 87
- POWERFIX PDM 250 A2 89
- Deutsch - 87 89
Manuais e produtos relacionados com Instrumentos de medida Powerfix PDM 250 A2
(49 páginas)
(25 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais